isiZulu
|
| Ubuningi: | |
|---|---|
I-UV Coating
Ivikela ingaphezulu emazingeni, imihuzuko, namagciwane, kuyilapho yengeza isicwebezelo esicashile.
Gqoka Isendlalelo
Iqinisekisa ukuqina kwesikhathi eside ngokuvikela ekugugeni kwansuku zonke.
Ifilimu Yokuhlobisa
Ukuphrinta kwangempela kwencazelo ephezulu kulingisa ukhuni lwemvelo, itshe, noma ukwakheka kwemabula.
I-SPC/LVT Core Layer
Yenziwe nge-100% ye-PVC emsulwa ne-calcium carbonate, enikeza ukuzinza namandla.
Izinketho zokubeka ngaphansi (IXPE/EVA/Cork)
Inikeza ukufakwa komsindo, ukunethezeka okwengeziwe, nokusebenza okungahambisani nokushelela.
I-Beveled Edge
I-micro bevel enezinhlangothi ezine ithuthukisa incazelo yepulangwe nokubukeka okwangempela.
Ukufaka Ukuchofoza Okulula
Ayikho i-glue, ayikho i-mess-vele uhlanganise amapulangwe ukuze alingane ngendlela evikelekile futhi engenamthungo.
I-Underfoot ekhululekile
Uma kuqhathaniswa nokuchofoza phansi okuqinile kwe-SPC, Ukuchofoza kwe-LVT kunikeza umuzwa othambile, ofudumele wonyawo.
I-Wide Design Izinhlobonhlobo
Itholakala ngogqinsi obuningi, izendlalelo zokugqoka, imibala, nezinketho zokugqamisa ukuze ivumelane namaphrojekthi ahlukahlukene.
Iqinile futhi Izinzile
Imelana nokuklwebheka, ingangeni manzi, futhi izinzile ngokwezinga elithile—ngisho nangaphansi kokushintsha kwezinga lokushisa nomswakama.
Izicelo Ezihlukahlukene
Ifanele izindlu zokuhlala, amahhovisi, izitolo zezitolo namahhotela. Iphelele kuwo womabili amaphrojekthi amancane e-DIY nokufakwa kwezentengiso okukhulu.
Isondlo Esiphansi
Ukuhlanza kulula ngokushanela okujwayelekile kanye ne-mopping eswakeme—akukho ukugcotshwa kwe-wax okudingekayo.
| Ukucaciswa | Imininingwane |
| Uhlobo Lomkhiqizo | I-LVT Chofoza / SPC Chofoza Iphansi |
| Okubalulekile | 100% Virgin PVC + Calcium Carbonate |
| Ubukhulu | 4–5 mm (izinketho zangokwezifiso ziyatholakala) |
| Izinketho Zokugqoka Zendlalelo | Ugqinsi oluningi luyatholakala |
| Ukuminyana | 2100 kg/m³ |
| Qeda | I-UV Coating, Ileveli Ecwebezelayo 6–8 |
| Ukwakheka Kobuso | Bushelelezi / Okunamathiselwe Okujulile |
| Indlela Yokufaka | Chofoza Isistimu |
| Uhlelo lokukhiya | I-5Gi / 2G |
| Indawo Yokufaka Ephezulu | 10 × 10 m (ngaphandle kokunwetshwa kokujoyina) |
| Bevel | Imiphetho Enezinhlangothi Ezine |
| Ukushisisa kwaphansi | Ihambisana nokushisisa kwamanzi/phansi; ayifanele ukushisisa ugesi |
| Ukugqoka ngaphansi | I-IXPE / EVA / Cork (1–1.5 mm ngokuzikhethela) |
| Iwaranti | Kufika eminyakeni engama-20 yokuhlala / iminyaka eyi-10 yezohwebo (ngokunakekelwa okufanele) |
| Into yokuhlola | Okujwayelekile | Umphumela |
| Ukubekezelela Ubude Nobubanzi | I-EN ISO 24341 | ≤0.15% (ubukhulu 0.5 mm) |
| Ukubekezelelana kwe-Squareness | I-EN ISO 24342 | ≤0.25 mm (≤400 mm), ≤0.35 mm (>400 mm) |
| Ukujiya Ukubekezelelana | I-EN ISO 24346 | ±0.15 mm |
| Ukuzinza kweDimensional | I-EN ISO 23999 | ≤0.15% |
| I-curling | I-EN ISO 23999 | ≤1 mm |
| Ukushesha Okukhanyayo | EN ISO 105-B02 | Ikilasi lesi-6 |
| Ukumelana Nomlilo | I-EN 13501-1 | I-Bfl-S1 |
| I-Castor Chair Resistance | EN 425 | Dlula |
| Ukusetshenziswa Kwezigaba | EN 685 | Ikilasi 23 Indawo yokuhlala / Ikilasi lama-33 Ezohwebo |
| I-Stain Resistance | EN 423 | Abathintekile |
| Ukukhishwa kwe-VOC | ISO 16000 | A+ |
| Slip Resistance | I-DIN 51130 | R9 |
| Ukuhlehliswa Kwezinsalela | ISO 24343-1 | ≤0.1 mm |
| Ukumelana Kwamakhemikhali | EN 423 | Dlula |
| I-Ortho-Phthalates | I-US EPA 3550c:2007 | Akukho Okutholiwe |
| I-PCP | I-EN 12673 | Akukho Okutholiwe |
| Ukukhishwa kwe-formaldehyde | EN 717-1 | E1 |
Umkhiqizi oqondile onentengo yokuncintisana ye-B2B
Ububanzi obubanzi bokuthungwa, imibala, nezendlalelo zokugqoka
I-OEM/ODM nokusekelwa kwelebula yangasese kuyatholakala
Izinketho zokufakwa ngaphansi kwangokwezifiso kanye nokupakisha
Ukunikezwa okuzinzile kwesikhathi eside nokuphathwa okuqinile kwe-QC
